Now remove all the 7MM and 10MM bolts to loosen the fender liner. Then remove the three Torx bolts and two snap clips as shown.

Next, remove the 7MM bolt from the bottom of the splash guard, and pull the splash guard off. Jack up the front of the car and put it on jackstands. In order to get to these bolts, we need to get into the inner fender on the passenger side.

Note, the two stud's sticking through the mount that I have circled is already there, however, they are not quite long enough to mount our bracket to safely. In this picture, I will show you how the mounting will work. The bracket for the reservoir might as well have been made to fit the C7. Here is a link to the reservoir and pump kit online and a pic of it below: Īpproximate cost: $20-$30, depending where you get it from You will also need two (M6-1.0) flange bolts with washers that are about 2' long, and two (M6-1.0) nuts, four 'fender washers' appropriately sized to fit your bolts, about 8' of speaker wire, one 12-pack of your favorite brand beer, and some patience! I confirmed that Advance Auto and Pep Boys both carry this in stock, but you may need to ask for it with a picture (below) as this is usually NOT out on the floor and is kept in the back. Fortunately for you, almost all major auto parts stores sell the exact one you need. You need to go buy the reservoir and pump kit. If you have a Z51, you are welcome to follow along, just note that you need to find an alternate mounting location under the hood.įirst things first. When you do that, you lose the ability to wash your windshield, so this is how you can get that functionality back! This process is slated for NON-Z51 cars as the relocation of the new tank puts it directly where the Z51 dry sump tank would have gone on the passenger side of the engine bay. This is Primarily for NON-Z51 owners that are planning to use their OEM windshield washer fluid reservoir as a methanol injection fluid reservoir. Who does this project apply to? I'm glad you asked. Today I am going to show you how to install a new and relocated windshield washer fluid reservoir tank and pump in a NON-Z51.

Windshield washer fluid pump